Advertisement
Quick Links
th
8900 North 55
Street ▪ Milwaukee, WI ▪ 53224-9540 ▪ 414-354-0300 ▪ (fax) 414-354-7905
¼" CUSTOM INSERT PANEL SIZES
BI-95
BI-98
29 Series
75 Series
75 Stainless Series
1115 Series
1175 Series
o Zero clearance with a flush/flat door panel.
o Door will accept a raised panel. Allow proper clearance, on hinge
side when installing a raised panel. Amount of clearance will
depend on raised panel thickness.
o The maximum panel thickness when inserted into the door reveal
(channel) is ¼" thick.
o For raised panels on BI 95, BI98, 29 series and 75 series models
the depth of the reveal is ¼" on both sides and bottom and ½" on
top.
o For raised panels on 75 Stainless, 1115, and 1175 series models
the depth of the reveal is ¼" on both sides, bottom, and top.
o Allow 9/16" clearance on hinge side for 75 Stainless models with
a flush/flat panel. Additional clearance may be needed on hinge
side when installing a raised panel. Amount of clearance will
depend on raised panel thickness.
o Panel not to exceed 20 pounds.
o
Conversion information: 1 inch = 2.54 cm
ORIGINS
13 15/32" H x 12 15/16" W
15 15/16"H x 13 15/16" W
21 13/32" H x 19 13/16" W
28 5/32" H x 22 15/16" W
29 13/32" H x 22 15/16"W
26 15/16" H x 13 15/16" W
26 15/16" H x 22 15/16" W
30164
Advertisement
