Advertisement
E CONNECTION FOR 2-CHANNEL OPERATION
1. Set the 2 CH/4 CH SELECTOR switch to "2 CH".
2. Connect the control amplifier's PRE OUT jacks to the M-35 INPUT jacks.
3. Connect speakers to the SPEAKERS terminals of the M-35.
Left Speaker (Optional)
QO
O
i Right Channel
Left Channel
D
:
©
TOO.
FAFA
GOMN.
SPEAKER
* Forthe connections of the control amplifier and
other equipment, also refer to the Instruction
Manual of them.
GOM
=ALUT-PARLELR
© Eeg
GO YAMAHA Mae i
CAUTION
20 VOLTS
ZO WATTS
60Hz
NIPPON GAKK CO. LTD.
ATTENTION PISIA E CHOE U(E IRIRE
i
WARNING
10 PREVENT FARE DA SHOE
HAZRAD DD NOT EXAUBL TINS APPLEAMEE TO
RAN QA MAES FU.
Polarity indication
The
polarity indication is marked
on the socket connected
to the
start of power transformer winding.
i
Right Speaker (Optional)
O
O
Polarity indication on power cord
The power cord of the M-35 is provided with the polarity
indication (the cord connected to.the start of power
transformer winding is indicated by "—" marking) so that
the polarities of the OED
in the system can be
matched. When the AC
OUTLET of your amplifier, etc. is
also provided with the polarity indication, connect the
power cord after matching the polarity. .
eee Up to 200W can be supplied to
other equipment. The supply is not
controlled by the M-35's POWER
Advertisement
