Samsung RS542NCAE Series User Manual page 13

SETTING UP YOUR SIDE-BY-SIDE REFRIGERATOR
Removing the refrigerator doors
If your entrance won't allow the refrigerator to pass easily through it, you can
remove the refrigerator doors.
Removing and installing the fridge door
A few things to mention first.
• Make sure that you lift the door straight
up so the hinges are not bent or
broken.
• Be careful not to pinch the wire harness on the door.
• Place doors on a protected surface to prevent scratching or damage.
1. Remove the upper hinge cover
the wires by gently pulling them apart
2. Remove hinge screws
wire screw by turning anticlockwise,
and take off the upper hinge
careful that the door does not fall on you
as you are removing it.
3. Remove the door from the lower hinge
lifting the door straight up
4. Remove the lower hinge
lifting it straight up.
5. After the refrigerator is placed to the specified position, install the freezer door
in the reverse order as above.
Installing the front cover of leg
Fix the front cover by turning three screws at
the front cover of leg clockwise.
using a screwdriver, and then disconnect
.
and the ground
.Be
by carefully
.
from the support by gently
Setting up_13