Samsung SM-S918B Repair Manual page 85

2
Before the heat cools with the heating bag applied, remove the adhesive sponge
between the front camera and the screen module using the SIM card tray ejection
pin.
Be careful not to damage the front camera and near components.
•
As the adhesive securing the camera is very strong, work slowly.
•
Be careful not to touch the ejection pin on the side of the camera.
•
If you have trouble removing the adhesive sponge, heat the microwaveable
heating bag additionally, and apply it to the front camera module to further soften
the adhesive. When reheating, it should be heated no longer than 30 seconds.
Disassembly and Assembly
85