Advertisement
Model:
TCGDZ-59
STANDARD FEATURES
DESIGN
• True's combination dry and refrigerated bakery
display case combines effi cient, high volume
merchandising and exceptional refrigeration with
an elegant curved glass front for sophisticated
presentation of high end desserts and pastries.
REFRIGERATION SYSTEM (LEFT SIDE)
• Factory engineered, self-contained, capillary tube
system using environmentally friendly (CFC free)
134A refrigerant.
• Extra large evaporator coil balanced with higher
horsepower compressor and large condenser
maintains 38°F to 40°F (3.3C to 4.4°C), ideally
suited for bakery products.
• Forced-air refrigeration system; sealed, cast iron,
self-lubricating evaporator fan motor(s) and
larger fan blades give True bakery cases a more
effi cient low velocity, high volume airfl ow design.
• Condensing unit located behind removable panel
in back of unit; slides out for easy cleaning and
maintenance.
CABINET CONSTRUCTION
• Exterior - white laminate front and side panels.
Color options available at no charge:
Walnut
Teak
Oak
Beige
• All laminate (and stainless option) ship separately
from unit and is fi eld installed. Stainless
steel top. Black front and rear grills and trim.
Template kit available at no charge for fi eld
customization of laminate.
• Interior - NSF approved white aluminum sides
and top, high impact plastic fl oor with coved
corners.
• Insulation - entire cabinet structure is foamed-in-
place using high density, CFC free, polyurethane
insulation.
PLAN VIEW
(709 mm)
28
3
/
"
8
(721 mm)
17
5
/
"
32
(436 mm)
WARRANTY
One year warranty on all parts
& labor and an additional 4 year
warranty on compressor.
(U.S.A. only)
2001 East Terra Lane • P.O. Box 970 • O'Fallon, Missouri 63366 • (636)240-2400 • FAX (636)272-2408 • (800)325-6152 • www.truemfg.com
Display Case:
Curved Glass Dual Zone
"Dry"/ Refrigerated Bakery Case
• Welded, heavy duty galvanized frame rail dipped
in rust inhibiting enamel paint for corrosion
protection inside and out.
• Frame rail fi tted with leg levelers.
CURVED FRONT DISPLAY GLASS
• Insulated, double pane curved glass front and
side panels provide extra large viewing area to
maximize bakery product presentation. Exterior
pane is tempered for safety.
• Front glass tilts forward for easy cleaning.
REAR DOORS
• "Low-E", double pane thermal glass inserts with
mitered plastic channel frames.
• Each door fi tted with 12" (305 mm) long molded
plastic handle.
• Self-closing doors, effi cient counter balanced
weight system for smooth, even, positive closure.
Sliding doors ride on stainless steel
V-channel with stainless steel bearings. Doors fi t
within plastic channel frame.
SHELVING
• Six (6) adjustable, heavy duty PVC coated wire
shelves 24
Shelving system is cantilevered and angle can be
adjusted to maximize presentation.
• Each shelf supports a maximum weight of
150 lbs. (69 kg).
Black White
PAN CAPACITY
• Cabinet holds a total of eight (8) 18"L x 26"D
(458 mm x 661 mm) display pans (4 per section)
or sixteen (16) 9"L x 26"D (229 mm x 661 mm)
display pans (8 per section). Pans supplied by
others.
LIGHTING
• Cabinet equipped with eight (8) light sources
for maximum product display; three (3) shelf
mounted and one (1) cabinet mounted per
section. Fluorescent lamps are low UV emitting
to enhance product appearance and increase
shelf life.
59
/
"
7
8
(1521 mm)
27
7
/
"
8
BACK VIEW
METRIC DIMENSIONS ROUNDED UP TO THE
NEAREST WHOLE MILLIMETER
SPECIFICATIONS SUBJECT TO CHANGE
WITHOUT NOTICE
TRUE FOOD SERVICE EQUIPMENT
3
5
/
"L x 22
/
"D (620 mm x 563 mm).
8
32
18.33°
47
/
"
13
16
(1215 mm)
Model
KCL
TCGDZ-59
• Safety shielded lighting tubes assure longer,
brighter, shadow-free product illumination.
MODEL FEATURES
• Refrigerator evaporator is epoxy coated to
eliminate the potential of corrosion.
• 5 amp exterior scale receptacle.
• Recessed exterior light switch and thermostat
control.
• NSF-7 compliant for open food product.
ELECTRICAL
• Unit completely pre-wired at factory and ready
for fi nal connection to a 115/60/1 phase - 20 amp
dedicated outlet. Cord and plug set included.
115/60/1
NEMA-5-20R
RECOMENDED OPERATION CONDITIONS
• TCG refrigerated models are designed to operate
in an environment where temperature and
humidity do not exceed 75°F (24°C) and 55%
relative humidity.
OPTIONAL FEATURES/ACCESSORIES
Upcharge and lead times may apply.
❒ 6" (153 mm) standard legs.
❒ 6" (153 mm) seismic/fl anged legs.
❒ 2
1
/
" (64 mm) diameter castors.
2
❒ Custom exterior laminates, contact factory for
details. See our website: www.truemfg.com for
the latest color offerings.
❒ Stainless steel exterior (fi eld installed).
❒ Mirrored interior ends with laminate exterior.
❒ Additional non-lighted shelves.
❒ Remote cabinets (condensing unit supplied
by others; system comes standard with 404A
expansion valve and requires R404A refrigerant).
Consult factory technical service department for
BTU information.
40
7
/
"
8
(1039 mm)
40
/
"
3
16
(1021 mm)
16
13
/
"
32
(417 mm)
35
1
/
"
2
(902 mm)
RIGHT VIEW
Elevation
Right
Plan
TFD084E
TFD083S
TFD084P
/
"
11
16
(18 mm)
53
7
/
"
32
(1352 mm)
3D
Back
TFD0843 TFD084B
Advertisement
