Locating A Particular Selection; Locating A Particular Point In A Selection - Sony CDP-C445 Operating Instructions Manual

Playing Discs
Locating a Particular Selection
There are two ways to locate the beginning of a desired
selection on the current disc.
A. To locate sequentially (Automatic Music Sensor)
— Press 44 once to locate the beginning of the current
selection.
— Press >> once to locate the beginning of the next
selection.
— Hold down !4<4 or PPI to skip selections.
B. To locate a selection directly
Press one of the numeric buttons on the player or remote
commander to enter the desired selection.
To enter a number greater than 10, use the and [4]
to [10] buttons.
Example:
To play from selection No.22
Press (2) (2).
To play from selection No.30
Press [3] m.
functions as the number 0.
Locating a Particular Point in a Selection
There are two ways to locate a desired point on a disc.
A. To locate a point on the current disc while monitoring
the sound
Hold down 44 or >> during play.
B. To locate a point on the current disc quickly by
watching the display
Press Il, then hold down << or >>. The search speed will
increase, but there will be no sound. Find the desired
point by watching the display.
Press îl or > again at the desired point to resume play.
"= =" appears in the display
If you continuously press >> during play at the end of the disc, "= =i"
appears in the display. Press << or I< to return to the normal display.
10