Table of Contents
Advertisement
Bottom
Description
No.
1
Air vents (intake)
2
Novo button hole
Air vents (intake)
The air vents allow air to be sucked inside of the PC to cool the internal components.
Important: When the PC is operating, do not place it on a bed, sofa, carpet, or other flexible surfaces.
Otherwise, the air vents will be blocked and the PC may overheat, reducing performance or causing the PC
to be unresponsive or even shut down.
Novo button hole
When the PC is powered off, you can press the Novo button to display the Novo button menu. From the
menu, you can then choose to:
• Open the firmware setup utility
• Display the boot device selection menu
• Display the Windows advanced startup options page
Note: The Novo button is rarely used during normal PC operations. To prevent users from accidentally
pressing it, the Novo button is placed in a recessed hole. You can use a straightened paper clip to press this
button.
Avoid constant body contact with specific hot sections
CAUTION:
When the computer is operating, it should be placed on a hard and flat surface with its bottom area
not in contact with user's bare skin. Under normal operating conditions, the temperature of the
bottom surface will remain within an acceptable range as defined in IEC 62368-1, but such
temperatures can still be high enough to cause discomfort or harm to the user if directly touched for
10
User Guide
Advertisement
Table of Contents
