Timer operations
The unit has the timer stand-by function.
With this function and a commercially-available audio timer, playback can be started at the desired time.
I
Connect the power cord.
• Connect each unit's power cord to the SWITCHED outlet of
the timer.
• Refer to the instruction manual of the timer.
Amplifier
^ Timer
^ Connect to the SWITCHED outlet.
2
3
Turn on the amplifier and the unit.
Insert a disc and set the starting time of the timer.
• Set the timer while the unit and the amplifier are ON.
• Be careful of the volume setting of the amplifier. (The loud sound may damage the speakers.)
Playback will start at the set time.
Note:
When operating the unit other than CD player using an audio timer, be sure to remove the disc from the CD player.
DP-20S0/DP-^O6O
17