Canon PIXMA iP6700D Series Quick Start Manual page 74

Auto sheet feeder lamp
(3) Press the Feed Switch button so that
the auto sheet feeder lamp lights.
• Loading the Print Media in the Auto Sheet Feeder
In this example, description is provided using Photo Paper Plus Glossy
4
11
x 6
11
/101.6 x 152.4 mm in your printer.
See "Media Types for Card Direct Printing" on page 16 for compatible paper.
1
Flatten the four corners of the paper before loading it.
WNote
If
the paper is curled, gently bend the corners in the opposite direction
until the paper becomes completely flat. See "Back of Paper is Smudged/
Paper Does Not Feed Properly/Printed Surface is Scratched" on page 62.
2
Prepare to load the paper.
(1) 1. Open the paper support.
2. Pull out the paper support
extension to support the paper.
~~~
(2) 1. Put your fingers in the notches in either side of the paper output tray and pull down to
open it.
2. Pull out the paper output tray extension completely.
3
Load the paper.
. - - - - - - - - Load limit mark
Do not load the stack of paper beyond this load limit
mark.
(1) Load the paper into the auto sheet feeder
with the print side facing UP.
(2) Align the paper stack against the cover
guide on the right side of the paper
support.
Ensure that the cover guide stands when
you load paper in the auto sheet feeder.
(3) Pinch the paper guide and slide it against the left side of the paper stack.
12