Table of Contents
Advertisement
Quick Links
Instructions for use
GB
English,1
RSG 864 J
Contents
Installation, 2-3-4-5
Unpacking and levelling
Connecting the electricity and water supplies
Troubleshooting, 13-14
WASHING MACHINE
GB
1
Advertisement
Table of Contents
Related Manuals for Hotpoint RSG 864 J
Summary of Contents for Hotpoint RSG 864 J
-
Page 1: Table Of Contents
Precautions and tips, 7 General safety Disposal Opening the porthole door manually Description of the washing machine, 8-9 RSG 864 J Control panel Display Running a wash cycle, 10 Wash cycles and options, 11 Table of programmes and wash cycles... - Page 2 Installation ! Keep this instruction manual in a safe place 2. If the floor is not perfectly level, compensate for future reference. Should the appliance be for any unevenness by tightening or loosening the adjustable front feet (see figure); the angle sold, transferred or moved, make sure the of inclination, measured according to the instruction manual accompanies the washing...
- Page 3 Connecting the drain hose • the supply voltage is included within the values indicated on the Technical Data Plate Connect the drain fixed on the machine. hose, without bending • the socket is compatible with the washing it, to a draining machine’s plug.
-
Page 4: The First Wash Cycle
Technical data If you are in any doubt regarding the electrical supply to your machine, consult a qualified Model RSG 864 J electrician before use. How to connect an alternative plug: width 59.5 cm The wires in this mains lead are coloured in... -
Page 6: Care And Maintenance
Care and maintenance Cutting off the water and Caring for the door and drum of electricity supplies your appliance • Turn off the water tap after every wash cycle. • Always leave the porthole door ajar in order This will limit wear on the hydraulic system to prevent unpleasant odours from forming. -
Page 7: Precautions And Tips
Precautions and tips Opening the porthole door manually This washing machine was designed and constructed in accordance with international safety regulations. The In the event that it is not possible to open the porthole following information is provided for safety reasons and door due to a powercut, and if you wish to remove the must therefore be read carefully. -
Page 8: Description Of The Washing Machine
Description of the washing machine DIRECT Control panel INJECTION TEMPERATURE button and OPTION indicator light button buttons and indicator lights ON/OFF button DISPLAY START/PAUSE button and indicator SPIN LOCK Detergent dispenser drawer light button WASH button CYCLE SELECTOR DELAY KNOB button Detergent dispenser drawer: used to dispense press the button again;... - Page 9 Display The display is useful when programming the machine and provides a great deal of information. The duration of the available wash cycles and the remaining time of a running cycle appear in section A (the display will show the maximum duration of the cycle chosen, which may decrease after several minutes, since the effective duration of the programme varies depending on the wash load and the settings chosen);...
-
Page 10: Running A Wash Cycle
Running a wash cycle only the second option will be activated; the indicator 1. SWITCH THE MACHINE ON. Press the button; light for the option which has been activated will be the START/PAUSE indicator light will flash slowly in a illuminated. -
Page 11: Wash Cycles And Options
Wash cycles and options Table of programmes and wash cycles Detergents Max. Max. temp. Description of the wash cycle speed (°C) (rpm) DAILY CLEAN Anti-Stain Power 20°C 20° 1600 20° Anti-Stain Turbo 45’ 1200 (Max. 40°C) 40°... -
Page 12: Detergents And Laundry
Detergents and laundry Detergent dispenser drawer Wool - Woolmark Apparel Care - Green: the wool wash cycle of this machine has been approved Successful washing results also depend on the correct by The Woolmark Company for the washing of wool dose of detergent: adding too much detergent will not garments labelled as “hand wash”... -
Page 13: Troubleshooting
Troubleshooting Your washing machine could occasionally fail to work. Before contacting the Technical Assistance Service (see “ Service”), make sure that the problem cannot be solved easily using the following list. Problem: Possible causes / Solutions: • The appliance is not plugged into the socket fully, or not enough to make contact. The machine does not switch on. - Page 14 The machine is noisy. • There will always be some motor, pump and drum noise during spin. The machine wont spin properly. • Out of Balance detected when attempting to go into a spin cycle - If this happens the machine will continue to try to repeat the distribution of the load required before the machine will go into higher spin speeds - This will increase the programme time accordingly.
-
Page 15: Product Guarantee And Repair Information
Product Guarantee and Repair Information Guarantee Recycling and Disposal Information As part of Hotpoint’s continued commitment to 12 Months Parts and Labour Guarantee helping the environment, Hotpoint reserves the right Your appliance has the benefit of our manufacturer’s to use quality, recycled components to keep down guarantee, which covers the cost of breakdown customer costs and minimise material wastage. - Page 16 195132976.01 04/2015 - Xerox Fabriano Indesit Company Spa Viale Aristide Merloni, 47 60044 Fabriano (AN) Italy www.hotpoint.co.uk...