Table of Contents
Advertisement
■
DVB-C, DVB-T, Analogue
1. Select
Auto Setup
2. Set
DVB-C Auto Setup Settings
(DVB-C)
Scan Mode
●
Full:
Scans the whole frequency range.
Quick:
Scans the suitable frequency in your country.
Normally set Frequency,
●
is not displayed or if necessary, enter each value specified by your
cable provider with
After settings, select
●
3. The confirmation screen is displayed and press
(Settings are made automatically.)
When the operation is completed, the channel at the lowest position will
●
be displayed.
■
Auto Setup using the buttons on the TV
1. Press and hold INPUT/OK/HOLD for MENU button for 3 seconds to
display the menu.
2. Set
Auto Setup
with following control panel buttons.
Move the cursor / select from a range of options / select the menu item
●
(up and down only)
Access the menu / store settings after adjustments have been made or
●
options have been set with INPUT/OK/HOLD for MENU button
with
/
and press
with
Symbol Rate
Numeric
buttons.
Start scan
with
- 84 -
OK
to access.
/
/
/
and press
and
Network ID
to Auto. If
/
and press
OK
OK
to start
Auto
OK
to store.
Auto
to search.
Setup.
Advertisement
Table of Contents
