Sharp DV-5465S Service Manual page 7

DV-946
a) Adjust G2.
b) Tune in white pattern.
c) Adjust colour to minimum.
d) Position colourmeter in the center of screen.
e) Using brightness and contrast buttons, select a luminance of =~ 120 NITS.
f) Operate again in Service Mode
and select location RED REFERENCE
/ GREEN REFERENCE
/ BLUE
REFERENCE to obtain colour coordinates:
X = 0.290 + 0.015
Y = 0.284 + 0.015
g) Exit Service Mode and check colour coordinates 'X' and "Y' at 20 and 120-NITS.
It may be necessary to
repeat procedure.
NOTE:
Locations: RED REFERENCE
alter 'X' coordinate; GREEN
REFERENCE
alter the 'Y' coordinates;
BLUE
REFERENCE alter the 'X' and 'Y' coordinates.
ALTER NVM POS XX XX
Assigned value
Storage Location
Assigned value
Storage Location
te be)
DV-5470S