Sony HANDYCAM HDR-CX 100 Operating Manual page 13

Step 1" Charging the battery pack
CHG (charge)
lamp
DC plug
DCIN jack
To tile wall outlet
(wall socket)
AC Adaptor
Battery pack Power cord
(Mains lead)
You can charge the "InfbLITHIUM" battery pack (H series) after attaching it to your
camcorder,
• 5_u cannot attach any "InfbLITHIUM" battery pack other tban the H series to your camcorder.
Turn offyour camcorder by closing the LCD screen.
Attach the battery pack by sliding it in the direction of the arrow until it
clicks.
Connect the AC Adaptor and the power cord (mains lead) to your
camcorder and the wall outlet (wall socket).
• Be surethat the • mark on the D("
plug
is fhcingright.
The CHG (charge) lamp lights up and charging starts. The CHG (charge) lamp turns off
when the battery pack is full?; charged.
When the battery is charged, disconnect the AC Adaptor from the DC IN
jack of your camcorder.
63
$_
_s 3