Components - Westinghouse WGen10500TFc User Manual

COMPONENTS

FIG. 6
A
B
D
O
A - Fuel Cap
B - Fuel Gauge
C - Battery
D - Muffler/Spark Arrestor
E - Carbon Canister
F - Carburetor/Choke
UNDERSTANDING YOUR GENERATOR
See Figures 6 - 7.
To reduce the risk of injury and product failure, read and
understand the information in this user's manual as well as
the information on the product labeling.
120V AC, 20A RECEPTACLES
This unit has two single phase, 60 Hz receptacles capable
of carrying a maximum of 20 amps.
120/240V AC, 50A RECEPTACLES
This receptacle can supply either 120V or 240V up to
50 amps.
BATTERY CHARGING PORT
Use the battery charging port along with the included battery
charger to charge the battery.
14 | English
F
J
E
K
P
G - Handle
H - Control Panel
I - Recoil Handle
J - Air Filter Cover
K - Wheel
L - Natural Gas/Propane Inlet
I
G
L
Q
M - Foot
N - Natural Gas Hose
O - Key Fob
P - Charger
Q - LPG/Propane Hose
BATTERY INDICATOR
Indicates that battery power is available. Light will remain
illuminated while the battery has charge.
BATTERY SWITCH
Enables or disables electric start. The battery switch must
be in the ON positoin to use remote start.
CIRCUIT BREAKERS (20A AND 30A)
The circuit breakers protect individual circuits from electrical
overload.
NOTE: The 20 amp circuit breaker limits the current that
can be delivered through the 5-20R GFCI receptacles to
20 amps and the 30 amp circuit breaker limits the current
for the L14-30R receptacle to 30 amps.
H
C
M
N