Table of Contents
Advertisement
Use suitable ovenware for roasting, e.g. a roasting
■
dish.
.Cleaning function
U se the "Pyrolytic self-cleaning" function to clean the
C l e a n i n g f u n c t i o n
cooking compartment.
You can choose from three cleaning settings.
Setting
Cleaning level
1
Light
2
Medium
3
Intensive
The dirtier the cooking compartment and the longer the
dirt has been there, the higher the cleaning setting
should be. It is sufficient to clean the cooking
compartment every two to three months. If required, you
can clean the oven more frequently. A cleaning cycle
requires only approx. 2.5 – 4.7 kilowatt hours.
Notes
For safety reasons, the appliance door locks
■
automatically once a certain temperature is reached.
It cannot be reopened until the n symbol for the
locking mechanism on the display goes out.
The interior lighting does not come on during the
■
cleaning function.
:
Warning
Risk of burns!
The cooking compartment becomes extremely hot
■
during the cleaning function. Never open the
appliance door. Allow the appliance to cool down.
Keep children away from the appliance.
; The appliance becomes very hot on the outside
Risk of burns!
■
during the cleaning function. Never touch the
appliance door. Allow the appliance to cool down.
Keep children at a safe distance.
:
Warning
Risk of harm to health!
The cleaning function heats up the cooking
compartment to a very high temperature so that food
remnants left over from roasting, grilling and baking will
burn off.This process releases vapours, which can
irritate the mucous membranes. While the cleaning
function is running, keep the kitchen well ventilated. Do
not remain in the room for long periods. Keep children
and pets away. Follow the instructions even when using
the Delayed start function with a delayed end time.
Before running the cleaning function
While cleaning is in progress, you can clean an
accessory at the same time, e.g. the universal pan or
the baking tray. Before starting the cleaning function,
remove the worst of the food remnants manually. Slide
the accessory in at level 2.
Duration
Approx. 1 hour, 15 minutes
Approx. 1 hour, 30 minutes
Approx. 2 hours
Clean the appliance door and along the edges of the
cooking compartment in the area around the seal. Do
not scrub or remove the seal.
Clean the inner door panel using hot soapy water and a
dish cloth. Dry with a soft cloth. If the cooking
compartment is heavily soiled, use oven cleaner.
You can clean the enamelled accessory supplied
Note:
in the cooking compartment when the cleaning function
is cleaning the cooking compartment. You cannot clean
any of the wire racks when using the cleaning function.
The wire racks are not suitable for the cleaning function
and will become discoloured. Further accessories that
can be cleaned using the cleaning function are listed in
the table for special accessories. ~ "Accessories"
on page 12
:
Warning
Risk of fire!
Loose food residues, grease and meat juices may
■
catch fire during the cleaning function. Before
starting the cleaning function, remove coarse dirt
from the cooking compartment and from the
accessories.
The appliance will become very hot on the outside
Risk of fire!
■
during the cleaning function. Never hang
combustible objects, e.g. tea towels, on the door
handle. Do not place anything against the front of
the appliance. Keep children away from the
appliance.
If the door seal is damaged, a large amount of heat
Risk of fire!
■
will be generated around the door. Do not scrub or
remove the seal. Never operate the appliance if the
seal is damaged or missing.
:
Warning – Risk of serious damage to health!
The appliance will become very hot during the cleaning
function. The non-stick coating on baking trays and tins
is destroyed and noxious gases are released. Never
clean non-stick baking trays and baking tins using the
cleaning function. Only clean enamelled accessories
using the cleaning function.
Setting the cleaning function
Before setting the cleaning function, ensure that you
have followed all instructions for preparation.
The duration of each cleaning setting is preset and
cannot be changed.
Touch the Menu field.
1.
The list of operating modes is displayed.
Touch the "Pyrolytic self-cleaning" text field.
2.
The cleaning setting is highlighted in white in the
display.
Turn the rotary selector to set the cleaning setting.
3.
The end time is calculated automatically.
Press the l Start/Stop button to start.
4.
The duration counts down in the display. The heating
line does not appear for the cleaning function.
The cleaning function starts.
Ventilate the kitchen when the cleaning function is
running.
Cleaning function
en
23
Advertisement
Table of Contents
