Table of Contents
Advertisement
11.
Component Specifications
11.1. Drain Pump
Drain pump is both mechanical and electrical component
which is used to drain water inside the washing machine. It
has a synchronous motor inside. For better performance
maintenance, pump filter should be cleaned regularly.
Nominal voltage
Nominal current
Nominal power
Frequency
You can determine the ohm value of drain pump by measuring from the socket with two blue cables connected to the electronic
220-240 V
0.28 A (±10 %)
37 W
50 Hz
Testing component
Check the resistance value on the component with multimeter as shown below.
Resistance value should be between 131- 141 Ω
card as shown in the figure.(referring X10 on the wiring diagram)
Technical features
Resistor (coil)
Water flow
Thermal protector
Component test
26
Drain pump
136 Ω (±5%)
17 L/min(to 1 m height)
YES
Advertisement
Table of Contents
