Panasonic WV-BP130 Operating Instructions Manual page 7

0 Lens Type and Drive Signal Selector (ALC
(VIDEO/DC), ELC)
Lets you select the mode according to the lens
type that is used with this camera.
ALC:
Lets you select this mode when an auto iris
lens {ALC lens) is used with this camera.
ELC:
Select this mode when a fixed iris lens or
manual iris lens is used with this camera.
If you have selected ALC select the mode accord*
ing to the type of auto iris lens drive signal to be
supplied to the lens from the auto iris lens connec¬
tor.
VIDEO:
Select this mode if you are using the auto
iris lens that requires a video drive signal.
DC:
Select this mode if you are using the auto iris
lens that requires a DC drive signal.
(D Auto Iris lens Connector
This connector is for connecting the auto iris lens
by a 4-pin male connector supplied as a standard
accessory (Part No. YFE4191J100).
(3)
Camera Mounting Screw Hole
This hole is for mounting the camera onto a mount¬
ing bracket.
© Flange-back Adjusting Ring
This ring adjusts the back focal length or picture
focus. Rotate this ring clockwise for a C-mount
lens or counterclockwise for a CS-mount lens.
© Lens (option)
© Power Cord (only WV-BP130)
Connect this power cord to an electrical outlet of
120V AC 60 Hz.
© DC 12 V Input Terminal (DC 12V IN (only WV-
BP132))
This terminal is for connecting the 12V DC power
supply cord.
© 24V AC Input Terminal (AC 24V IN (only WV-
BP134))
This terminal is for connecting the AC 24V 60 Hz
power supply cord.
© Video Output Connector (VIDEO OUT)
This connector is for connecting with the VIDEO IN
connector of the monitor.
-
5
-