Inspect The Device; Care At The Point Of Use; Preparation For Cleaning; Visual Inspection, Cleaning And Disinfection Frequency - GE MAC VU360 Operator's Manual

Cleaning and Disinfection
• Sodium salts

Inspect the Device

Carefully inspect devices between uses to verify proper function.
Evidence of damage and wear on a device may include but is not limited to
discoloration, excessive scratches, wear, and cracks. Improperly functioning devices,
damaged, and excessively worn devices should not be used.

Care at the Point of Use

Clean instruments as soon as possible after use.
Soiled devices must be separated from non-contaminated devices to avoid
contamination of personnel or surroundings.

Preparation for Cleaning

For multi-piece or complex instruments, please refer to their disassembly instructions.
The disassembly instructions are available in the MAC VU360
System Service Manual.
Contact your local GE Healthcare service representative for further information.
For instruments produced by another manufacturer, reference the manufacturer's
instructions for use.

Visual Inspection, Cleaning and Disinfection Frequency

The table indicates the frequency of visual inspection, cleaning, and disinfection
procedures.
Component
Device and Trolley
Acquisition Module
Leadwires
114
Visual Inspection
Daily, preferably before
the equipment's first
use each day
Daily
Refer to the supplier's instructions for leadwire cleaning and disinfection.
MAC VU360 ™ Resting ECG Analysis System
™
Resting ECG Analysis
Cleaning Disinfection
Monthly, or more Follow the same
frequently, as needed frequency as cleaning.
Disinfection must
be performed after
cleaning.
After use on each After use on each
patient and prior to use patient and prior to use
on subsequent patient. on subsequent patient.
Disinfection must
be performed after
cleaning.
2088531-370-2