Table of Contents
Advertisement
I
Viewfinder Screen Indications and Menus
Og-L
(43)dZ€9-0xd
(on)ze9-oxd
Items and settings in advanced menu 2 (continued)
EVS
ON: enable the EVS
Whether or not to enable
tunction.
the EVS function to
increase the vertical
definition from 400 lines to
450 lines (NTSC) or from
450 lines to 530 lines (PAL).
* When using a CCU-M5/
MSP Camera Control Unit,
make this setting on the
CCU-M5/M5P.
+ Enabling this function
tends to increase the
occurrence of aliasing
(moiré patterns).
OFF: disable the EVS
function. (Normal setting)
MODE is set to "STD"
Iris adjustment mode
Automatic adjustment
White balance
ATW function (Auto Tracing
adjustment mode
White balance)
Camera image (CAM) or | Camera image
color bar (BARS) output
High, medium and low
0 dB, 9 dB, 18 dB
gain settings*
Dynamic contrast control | On
function (DCC)
Electronic shutter*
Color matrix setting"
Hyper gain function
Aut iris backlight mode
Auto iris spotlignt mode
Black balance
adjustment
Master pedestal levet (M.
PED)'
Detail (outline) emphasis
level*
iris automatic adjustment
reference value
Dua! pixel readout (OPR)
Ott
function*
b) When EZ MODE is set to "CUSTOM", moving the EZ
MODE switch to the ON position does not change the
items marked with an asterisk in the above table to
standard values.
Off
Standard
Automatic adjustment
enabled
+40
** ADVANCED MENU3 **
7b
IND:
IRIS
IND: ON
GAIN _ INO:
FILTER IND: ON
MIC
IND: ON
AUDIO IND: ON
TAPE
IND: ON
IND: ON
The items in advanced menu 3 select which items are
normally displayed in the viewfinder.
Items and settings in advanced menu 3
Whether or not to show the
LOW LIGHT indication
when the lighting ts
insufficient.
IRIS IND
Whether or not to show the
fens f-stop indication.
Regardless of this setting,
however, the lens f-stop
indication shows constantly
when the EZ MODE switch
is in the ON position.
GAIN IND
Whether or not to show the
gain indication (the gain
setting, and the settings of
the HYPER GAIN switch
and the DPR function)
constantly.
Regardless of this setting,
however, the gain indication
shows constantly when the
EZ MODE switch is in the
ON position.
FILTER IND
Whether or not to show the
setting of the FILTER
contro} constantly.
Regardless of this setting,
however, the setting of the
FILTER control indication
shows constantly when the
EZ MODE switch is in the
ON position.
MIC IND
Whether or not to show the
camera microphone output
indication.
indication. (Normal
setting)
OFF: do not show the LOW
LIGHT indication.
ON: show the lens f-stop
indication. (Normal
setting)
OFF: do not show the lens
f-stop indication.
ON: show the gain
indication constantly.
(Normal setting)
OFF: show the gain
indication only for about 2
seconds after the setting
is changed.
ON: show the setting of the
FILTER controt
constantly. (Normal
setting)
OFF: show the setting of
the FILTER conwol only
for about 2 seconds after
the setting Is changed.
ON: show the camera
microphone output
indication. (Normal
satting)
OFF: do not show the
camera microphone
output indication.
(Continued)
AUDIO IND
When connected to a PVV-
3/3P, whether or not to
show the audio recording
Jevet indicators.
lem
SESS
mae
Soronin
ra
ON: show the audio
recording level indicators.
(Normal setting)
OFF: do not show the
audio recording levet
indicators.
TAPE iND
When connected to a PVV-
3/3P, whether or not to
show the tape remaining
indication.
ON: show the tape
remaining indication.
(Normal setting)
OFF: do not show the tape
remaining indication.
TC IND
When connected to a PVV-
3/3P, whether or not to
show a time data value.
ON: show the time data
value. (Normal setting)
OFF: do not show the time
data value.
Advanced menu 4
** ADVANCED MENU4 **
710 IND: ON
ID SET:
+
Items and settings in advanced menu 4
ID IND
Whether or not to show the
camera ID in the viewfinder
when color bars are
displayed.
stb
ON: show the camera ID
with the color bars.
(Normal setting)
OFF: do not show the
camera ID.
ID SET
Used to set the camera ID
{maximum of eight
characters, alphanumerics,
punctuation and spaces).
4
42
|To select the character
input position
Operate the DISP CHG
switch.
Pressing it down moves the
character input cursor to the
right, and pressing it up
moves the character input
cursor to the jeft.
An attempt to move the
character input cursor to the
position of the ninth
character returns to the
normal display.
To select the input
character
Operate the UP/ON button
or DOWN/OFF button.
Advertisement
Table of Contents
