General Tips On Installation; Mobile Use - Kenwood TR-7400A Operating Manual

AS ASA CEU NADA UED ETIDS RED ONE,
SECTION 3. GENERAL TIPS ON INSTALLATION
EUREN
3.1 MOBILE USE
1. Installation Position
Your TR-7400A may be installed under the dashboard of
your vehicle for convenient operation. Be sure that its posi-
tion does not restrict your leg movement to the brake pedal.
A typical installation is shown in Fig. 4.
2. How to Install (Fig. 5)
IMPORTANT
The TR-7400A is designed for a negative ground installation.
a) Securely install the mounting bracket with the suppli-
ed bolts and nuts.
b) Insert the transceiver into the mounting bracket using
the mounting rails.
c) Adjust the rail angle for the desired position of the
transceiver. This assures operational convenience and
safety while driving the vehicle.
d) Unfold each snap lock, hook on the pawl, then clamp
the snap lock. Both locks should be fully fastened to
get full effect of the spring action.
Fig. 4 A Typical Installation
CAUTION
Be sure that both rails are fully seated in the mounting
bracket before clamping the locks.
B O d y o IIED. LLL LLL ALA LLL LLL Lah hbk LLL
Slide the set into the bracket
as far as possible
o Lock Pawl
Adjust the vertical angle of the set.
Hook on the pawl and fold forward.
Fig. 5 How to Install