Table of Contents
Advertisement
Advanced Recording Operations
Succession (Relay Recording)
coy You don't have to adjust the recording level or
during normal-speed dubbing, set DOLBY NR to match
Key You can adjust the pitch of the playback on deck A
{TC-WE805S/WE705S/WE505 only)
See page 5.
Note
If a TV set is placed near the tape deck, noise may occur
1
during high-speed dubbing. In that case, turn the television
set off or move it away from the tape deck.
Insert blank cassettes into both decks.
Make sure that record-protect tabs on the
cassettes have not been removed.
4
Press REC @ on deck A.
skip.
Deck B changes to recording pause.
5
Start playing the program source.
2
Locate the point you want to resume recording on
6A dust the recording level manually, if necessary
To record from
Press
The front side
[> on deck A
The reverse side
<J on deck A
To stop Relay Recording
SV
SS ST
A
EB
ET
A
NTE!
During
Press
Recording on deck A
@ on deck A
Recording on deck B
on deck B
v
Note
Make sure that [> on deck B appears in the display. If it
doesn't, press E> on deck B once; otherwise, Relay
'
Recording stops when the reverse side of the cassette in deck
B finishes.
Advertisement
Table of Contents
