Grundig 42 VLE 9480 SL Manual page 32

networK­instAllAtion
wired­network­setting
There are two ways of making the wired network
settings.
A Automatic connection,
a ll data regarding connection settings (»IP
Address«, »Netmask«, »Gateway« and
»DNS«) are obtained from modem automati-
cally.
B Manual connection,
a ll data regarding connection settings (»IP
Address«, »Netmask«, »Gateway« and
»DNS«) must be configured manually.
Automatic­connection
Most of the home networks are Dynamic. If you
have a dynamic network, you must use a DSL
modem that supports DHCP.
Modems and IP sharers that support DHCP ob-
tain the »IP Address«, »Netmask«, »Gateway«
and »DNS« values required for internet access
automatically, and thus you are not required to
enter those values manually.
1 Open the menu with »menu«.
2 Select menu item »INTER@CTIVE TV« with
» « or » « and press »oK« to confirm.
v Λ
– » INTER@CTIVE TV« menu is layed.
iNteR@CtiVe tV
Inter@ctive Applications
N S
etwoRk ettiNgS
Connection Type
Network Settings
IP Address
DNS
Netmask
Gateway
MAC address
e
b
­ 3 2
ENGLISH
08.08.2012
OK
C
able
a
uto
10.134.151.15
10.134.150.8
255.255.255.0
10.134.151.254
e1:DF:bF:92:00:11
Connect
xit
Connection test
aCk
­-----------------------------------------------------------------------------
3 Select the line »Connection Type« with »
or » « and select »Wired« with »
Λ
4 Select »Network Configuration« with »
» « and select »Auto« with »
Λ
5 Select »Connect« with »
the modem connection.
– » Connecting ... Please wait« message will
be displayed.
6 Press »
network connection is established with the
current settings.
– » Testing ... Please wait« message will
be displayed, and if the connection is
established »Connection To Gateway:
Success«, »Internet Connection: Success«
messages will be displayed.
7 Press »menu« to end the setting.
note:
If you do not have a dynamic network,
7
follow the instructions in manual connection
section.
15:42
« (red) to establish

« (green) to make sure that the

«
v
< >
«, » «.
« or
v
< >
«, » «.