Table of Contents
Advertisement
The timer, time display, panel lock
and stereo/bilingual transmissions
The Timer
The TV can be set to turn itself On or Off after a
certain time.
Select Timer from the top menu bar.
1
Timer
Off timer
On timer
0 – 9
: To set
EXIT
: To exit
Press Q to select On or Off timer. Use the
2
number buttons to set the required time. For
example, to switch the TV off in one and a half
hours enter 01:30.
If setting the Off timer, press EXIT to finish. If
3
setting the On timer, enter the programme
position number required, then press
the TV into Standby. The GREEN On timer
indicator on the front of the TV will now be lit.
Any equipment connected with Scart leads must
also be put into Standby to prevent them from
being displayed when the timer switches on.
Once the On timer has been set the TV can be
switched on at any time by pressing
Green On timer indicator will remain on until the
set time period as passed when the TV will go to
the chosen channel. This feature can help to
avoid missing favourite programmes.
To cancel the On timer, enter zero in each
4
position including the programme position.
The Time Display
The time display facility allows the current time to be seen
on the TV screen.
Press
/
whilst watching a normal TV broadcast to
8
9
see a time display from the broadcaster. It will remain on
screen for about 5 seconds.
00:00
00:00 P 0
i
to put
. The
i
14
Panel lock
Panel lock disables the buttons on the side of the TV.
All buttons on the remote control can still be used.
From the Feature menu select Panel lock and
1
choose ON or OFF using S or R .
Feature menu
AV connection
Picture position
Panel lock
Automatic format
Blue screen
Convergence
When Panel lock is ON, a reminder will appear
when any of the side panel buttons are pressed.
Once the set has been switched off it can ONLY
be brought out of standby using the remote
control.
Stereo and Bilingual transmissions
If stereo or dual language broadcasts are transmitted the
word Stereo or Dual will appear on the screen each time
programme positions are changed, disappearing after a
few seconds. If the broadcast is not in stereo the word
Mono will appear.
Stereo... Press
to select Stereo or Mono.
I/II
O
Bilingual... Bilingual transmissions are rare. If they are
transmitted the word Dual will display. Choose the
required programme number and if the word Dual
appears press
to select Dual 1, Dual 2 or Mono.
I/II
O
ON
OFF
ON
Advertisement
Table of Contents
