Advertisement
(7) On/Off Timer Button [3
When the time you have set using the On/Off Timer
Button has elapsed (anywhere from 10 min. to 12
hr. 50 min.), the set will automatically either turn
iiself on or enter standby mode.
<How to Set the On Timer>
1. Press the On Timer button.
2. The previously set time will be displayed in
yellow for about 5 sec. al the lower right of your
screen. (The previously set time is stored in
memory.)
. If your wish to reset the timer to the previously
set time, then setting is now complete.
. If you wish to set the timer to a time different
from the previously set time, then press the On
Timer button again while the time is still being
displayed on the screen.
. Each time you press the button, the display will
change as shown.
*** 50.00 — 0.10 > ----— 12.50 — 0.00 eel
L_Prev.
6. In order
to know
when
the
ON-TIMER
programming has been run properly, when the
TV is in the standby mode, the LED indicator
remain iluminated in ORANGE.
GIGI DRISA
Notes:
1. If the previously set time is "0.00", or if you
are setting the timer for the first time since
buying your set, begin at "0.00".
. If the Main Power is turned off after the On
Timer has been set, the On Timer will be
turned on, then the timer will be reset.
The colour of LED indicator
GREEN — ORANGE
Advertisement
