Table of Contents
Advertisement
FAVORITE TRACK SELECTIONS
@>
The programme of a given CD can also be stored in the changer's permanent (FTS/TITLE) memory. Your favorite
track selection of this CD can then be called up and played whenever you wish. The selection will remain stored in
the FTS/TITLE memory even if you play the entire CD or compile a different programme from it.
You can also store a name for the CD in the FTS/TITLE memory.
The number of CDs which can be stored in the FTS/TITLE memory depends on the number of tracks in each
programme and the number of names you allocate to CDs. For example:
- at a maximum of 20 tracks per programme you can store up to 60 CDs in the FTS/TITLE memory;
- if you also wish to give a name to the CDs, then you can store up to 45 CDs containing 10 tracks per programme;
- if you wish to store only names, then you can enter a name for 80 CDs.
If FULL lights up, then the FTS/TITLE memory is full: you must erase one or more old FTS programmes or names
to make room to store the new programme or name. See: 'ERASING A FAVORITE TRACK SELECTION' and
'ERASING A NAME'.
STORING A FAVORITE SELECTION (FTS and PRG)_
• Load the CD and press FTS 6.
- ITtS I starts flashing and SELEl I DISC appears on the display.
• Select the number of the required CD using DISC SELECT 70 or DISC 6 (on the remote control).
- FTS PROiJRRM-FLRY-SHUFFLE-CffNCEL appears on the display.
• Press PRG 3 to open the memory.
• Key in the required track numbers of the selected CD using the 1-0 digit buttons 2.
• Press PRG again.
- FTS lights up, with next to it the ranking number of this programme.
- The selection is now stored in the FTS memory under this number, if a selection of a particular CD was already
stored, then it is automatically erased and the new selection is stored under the old ranking number.
STORING A NAME
(TITLE, 1-0 and
►►!)_
A name is entered with the digit/alphabet buttons 2. A name can consist of a maximum of 14 characters (letters,
digits and/or symbols). With the '9' key you can enter a space (|_|). With SYMBOLS you can enter the symbols -, +
and *. When a name has been stored, then this will appear on the display as soon as the CDs contents list has
been scanned (after inserting the CD and closing the CD compartment).
• Load the CD and press TITLE 5.
- SELECT Cl I SC appears on the display.
• Select the number of the required CD using DISC SELECT 70 or DISC 6 (on the remote control).
- TITLE FR05RRI1-CRNCEL appears on the display.
• Press PRG 3.
-
flashes on the display.
- You can now enter the required name using the digit/alphabet keys; after each character that you key in press
►►I to pass on to the next position on the display (with
you return to the previous position).
• Press PRG 3 again as soon as you have entered the complete name.
- The complete name appears on the display (if the name contains more than seven characters it will scroll over
the display).
- The name has now been stored in the FTS/TITLE memory.
Changing a name:
• Press TIJLE 5.
- SELECI DISC appears on the display.
• Select the number of the required CD using DISC SELECT 70 or DISC 6 (on the remote control).
- TITLE PROGRAM-CfiNCEL appears on the display.
• Press PRG 3.
- The name appears on the display.
• Enter the new name using the the digit/alphabet keys and
►►land store it with PRG.
15
Advertisement
Table of Contents
