Hill-Start Assist Control (Hac); Good Braking Practices - Hyundai IONIQ 5 Owner's Manual

Hide thumbs Also See for IONIQ 5:
Table of Contents

Advertisement

Hill-Start Assist Control (HAC)

Hill-Start Assist Control helps prevent the
vehicle from rolling backwards when
starting a vehicle from a stop on a hill. The
system operates the brakes automatically
for approximately 2 seconds (maximum
of 5 seconds when the accelerator pedal
is slightly depressed during HAC
operation) and releases the brake after 2
seconds or when the accelerator pedal is
depressed.
WARNING
Always be ready to depress the
accelerator pedal when starting off an
incline. Hill-Start Assist Control activates
only for approximately 2 seconds
(maximum of 5 seconds when the
accelerator pedal is slightly depressed
during HAC operation).
Information
• Hill-Start Assist Control does not
operate when the gear is shifted to P
(Park) or N (Neutral).
• Hill-Start Assist Control activates even
when the ESC (Electronic Stability
Control) is off. However, it does not
activate, when ESC does not operate
normally.

Good Braking Practices

WARNING
Whenever leaving the vehicle or parking,
always come to a complete stop and
continue to depress the brake pedal. Shift
the gear to the P (Park) position, then
apply the parking brake, and press the
Start/Stop button to the OFF position.
Vehicles parked with the parking brake
not applied or not fully engaged may roll
inadvertently and may cause injury to the
driver and others. ALWAYS apply the
parking brake before exiting the vehicle.
Be aware of wet brakes. The brakes may
get wet if the vehicle is driven through
standing water or if it is washed. Your
vehicle will not stop as quickly if the
brakes are wet. Wet brakes may cause the
vehicle to pull to one side.
To dry the brakes, apply the brakes lightly
until the braking action returns to normal.
If the braking action does not return to
normal, stop as soon as it is safe to do so
and call an authorized HYUNDAI dealer
for assistance.
DO NOT drive with your foot resting on
the brake pedal. Even light, but constant
pedal pressure can result in the brakes
overheating, brake wear, and possibly
even brake failure.
If a tire goes flat while you are driving,
apply the brakes gently and keep the
vehicle pointed straight ahead while you
slow down. When you are moving slowly
enough for it to be safe to do so, pull off
the road and stop in a safe location.
Keep your foot firmly on the brake pedal
when the vehicle is stopped to prevent
the vehicle from rolling forward.
6
6-39

Advertisement

Table of Contents
loading

Table of Contents