U-Line UACR014-BS01A User Manual & Service Manual page 14

USER GUIDE
2. Remove corresponding screws on opposite side of
cabinet.
3. Install bottom hinge on opposite side.
Install top hinge:
Top Hinge
Left Side
1. Remove pivot screw from hinge, flip hinge over, and
install the pivot screw in the same hole from the
opposite surface.
2. Lift the door, rotate 180
bottom hinge.
3. Align edge of top hinge with the outer edge of the
unit.
4. Install hinge onto top of door.
5. Install three screws and tighten.
Install grille if applicable.
Align and adjust the door:
Align and adjust the door (see DOOR ALIGNMENT AND
ADJUSTMENT)
Door Adjustments
Top Hinge
Right Side
Pivot
Screw
, and set door onto the
0
14