Operation - Denon DCD-1500 Operating Instructions Manual

How to load the disc
@ Be certain to place the disc in the guide in the center of the disc
holder.
@ Press the disc holder open/close button ( A OPEN/CLOSE). The
disc holder will then close automatically.
@ When the disc has been loaded, it is automatically rotated for a
few seconds and track number({Q) is read out on the display.
After the rotation stops and the disc loading is complete, the
total number of tracks on the disk is displayed under TRACK NO,
the total playback time is displayed under TIME. The DISC in-
dicator lights.
@ When the disc holder is closed, the disc will be loaded even if the
play button (» PLAY) or pause button ([] PAUSE) is pushed. If
PLAY is pushed at this time, playback automatically begins at the
first track.
Caution:
® Becareful not to place any foreign objects in the disc tray. This may result in malfunction.
REGULAR OPERATION |
Sequential playback is described below.
. osc [roc] 3 | 2 [7 |e] o [rol
@ Turn the power switch ON, and load a cme roe ee EERE
disc.
(2) Press the play key (PPLAY).
@ The track number, index number, and
playback time of the track being played
are displayed.
@ If the disc is warped or dirty and the informa-
tion on its innermost track cannot be read
properly, the display will appear as shown in
the diagram below. This may cause delays
(2) Stopping playback in the location of the beginning of a track.
7 TRACK NO. INDEX TIME TRACK NO. INDEX TIME
DENON roy ano nomeass comer ome nant
ee "
no 39
fa
& 29 Gs P
uur cow Os aoe Ci Cra Crs
~— REMAINING TIME ~ ~ REMAINING TIME —
E CFA) C25) CET COM aE 335 Gee Cem) Tea
Norma! appearance Improper read
@) Press the stop button (# STOP)
-~ .¢ 2 | eee ti wd a a
.
Sen A Meese SMe ses, Maes.
ae