Table of Contents
Advertisement
Preferences
LCD & LED Management
Enable Missed Call Backlight
Enable Missed Call Indicator
Enable Contact Full Indicator
Enable Indicator When LCD is Off
TR-069
Enable TR-069
ACS URL
ACS Username
ACS Password
Enable Periodic Inform
Periodic Inform Interval (s)
Connection Request Username
Connection Request Password
Connection Request Port
CPE CA Certificate
CPE User Certificate
If set to "Yes", the LCD backlight will be
turned on when there is a missed call on
the GAC2570.
Note: Needs reboot to take effect.
If set to "Yes", the LED indicator on the
upper right corner of the GAC2570 will
light up when there is a new voicemail on
the GAC2570.
If set to "Yes", the LED indicator on the
upper right corner of the GAC2570 will
light up when the contact storage or
message storage is full.
If set to "Yes", the LED indicator on the
upper right corner of the GAC2570 will
light up when the LCD screen is off.
Sets the device to enable the "CPE WAN
Management Protocol" (TR-069). The
default setting is "No".
Note: Reboot the device to make changes
take effect.
Specifies URL of TR-069 ACS (e.g.,
https://acs.test.com), or IP address.
The default setting is
https://acs.gdms.cloud
Enters username to authenticate to ACS.
Enters password to authenticate to ACS.
Enables periodic inform. If set to "Yes",
the device will send inform packets to the
ACS. Default is "No".
Configures to send periodic "Inform"
packets to ACS based on a specified
interval. The default setting is 86400.
Enters username for the ACS to connect to
the device.
Enters password for the ACS to connect to
the device.
Enters the port for the ACS to connect to
the device. The default setting is 7547.
Select the CA certificate for server
verification.
Press "Manage" to upload the CA
certificate.
Select the user certificate to be used for
mutual server authentication. If the private
key is included, upload it with the user
certificate.
Press "Manage" to upload the User
Certificate.
Advertisement
Table of Contents
