Sony Cyber-shot DSC-S40 User's Manual / Troubleshooting page 78

Printing is canceled.
• You disconnected the USB cable bcl_)re the _
(Do not disconnect
USB cable) mark
disappears.
Cannot insert the date or print images in the index mode.
• The printer does not provide these functions. Consult tilL' printer m_mu f_Jcturer as to _hcther
the printer provides these functions or not.
• The date may not be inserled ill the index n/ode depending on the printer. Consult the printer
lnanu f_lctu rer.
"- ....... " is printed on the date=inserted part of the image.
• hn;igcs that do not h;ivc tilL' recording d,ta cannot bc printed _ith tile date inserted. Set [Date]
to
IOffl
and print the image again (page 67).
Cannot select the print size.
• Consult tilL'printer nmnufacturcr as to whether the printer can provide the desired size.
Cannot print the image at the size selected.
• Disconnect tile USB cable Lind reconnect it _hcnevcr you change tilL' pLJpcr size afler the
printer has been connected to the camera.
• The print setting of the camera dill_:rs from that of the printer. Change the setting of either the
camera (page 67) or the printer.
Cannot operate the camera after canceling printing.
• Wait l_)r _J_hile as tilL' printer is cmrying out tilL' c_mcellation. It may t_Jke some time
depending on the printer.
Your camera does not work.
• Use the type of batteries you c_m use _ith this camera (page 85).
• The battery level is low (The ¢_\_indicator appears), lnstall new batteries or charged Nickel-
Metal Hydride batteries (_ step 1 in "Read This First").
The power is on, but the camera does not work.
• TILL' b uilt-in microconlputer is not _ orking properly. Rcn/ove the bLJtterics, Lind then, LJlkL'r o ne
[Ilin/ItL', insL'rt thL' batteliL, s and turn on tilL' calilera.
Cannot identify an indicator on the screen.
• See p_Jgc 16.
78