Table of Contents
Advertisement
Listening to Nature Sounds
1. Press the ©
On/Sleep Button Once
to turn the power ON.
2. Press the
©
AM/FM/Sounds Button
until the
((;sounds»)
Indicator
appears on the bottom left corner of the
display.
3. Press any of the four nature sound buttons
0©©@ (Wind, Forest, Brook, Ocean).
4. Rotate the ©
Volume Dial
to adjust the volume level.
5. Press the ©
Off/Reset Button
to turn the power OFF when you are finished listening.
Important
- Playing the nature sound of your choice will not affect the one that is set for the wake-up time.
Setting the Radio Alarm Time
Before you begin please note the following important information:
• While setting the alarm times, the display will return to the current clock time if no button is pressed within 10
seconds. You can exit the Setting Mode at anytime by simply pressing the ©
Alarm Set Button
repeatedly until
the current clock time is displayed.
•
Before setting the Radio Alarm Time, you must preset the radio station you wish to wake to, into the preset
memory (see
Preset Station Memories).
1. Press the ©
Alarm Set Button
until the
Radio Alarm Indicator
flashes on the upper left side of the display.
2. Press the ©
AM/FM/Sounds Button
to choose the AM or FM band you desire. The
AM
or
FM Indicators
will
appear on the lower left side of the display.
3. Press the ©©
Up
or
Down Preset Buttons
to find the preset station you wish to wake to.
4. Press the ©
Hr./Mon. Button
to set the correct alarm hour. Make sure you set the correct AM or PM. The
PM
Indicator
is located on the left side of the display.
5. Press the ©
Min./Date Button
to set the alarm time you desire.
6
. Press the ©
Alarm Set Button three times
to return to the current time display.
7. Press the ©
Radio Alarm Button
until the
Radio Alarm Indicator
appears on the upper left side of the display
to confirm that Wake to Radio is ON.
H o
Advertisement
Table of Contents
