Summary of Contents for NAUTITECH Wi-Fi Bubble SpitFire
Page 1
® Spitfire Wi-Fi Access Point Instruction Manual Version 1...
Page 2
IECEx service facility. Contacts P: +61 2 9899 6857 (NSW) h: +61 7 4911 4171 (QLD) sales@nautitech.com.au www.nautitech.com.au Proprietary Designed, written and produced by: Nautitech Mining Systems Pty Ltd Unit 3/9 Packard Avenue Castle Hill NSW 2154 QA-PM-60-01 Page 2 of 22...
Page 3
Only documents released via the Nautitech ISO documentation control system are authorised for customer use. If there are any concerns regarding the currency ® or validity of your copy of this document, refer to the Nautitech Quality Manager. ® Document Owner: Managing Director - Nautitech ®...
Table of Contents Getting Started ......................9 Purpose ..........................9 Understanding this Guide ....................9 Using the Documentation Standards ................10 Prerequisites ........................10 Getting Help ........................10 Introduction ........................11 Introduction ..........................11 Features ............................11 Physical Details ..........................12 What is included? ........................14 Ethernet Connector .........................12 Antenna connection ........................12 DC Power Connector ......................12...
Page 7
Table of Figures Figure 1..............................14 Figure 2..............................15 QA-PM-60-01 Page 7 of 22...
Page 8
List of Tables Table 1 ..............................15 Table 2 ..............................19 QA-PM-60-01 Page 8 of 22...
Getting Started Purpose The purpose of this guide is to provide the purchaser of the equipment described herein, with a comprehensive set of information covering all the operational and functional aspects of the equipment. This guide is the primary reference source for personnel involved with installing, commissioning and maintaining this equipment.
Mines are to contact their equipment OEM. ® This document is also web based and is maintained with the latest content from an Nautitech master document. Always refer to the web based reference to ensure that you are using the current information.
The WAP connects to a wired router, Ethernet switch or hub via an Ethernet cable, and transmits a Wi-Fi signal within a designated area making it accessible by other Wi-Fi ® capable devices, cap lamps, telephones, Nautitech Data Profilers, etc. By installing the Access Point throughout an entire mine site, users (machines and personell) may roam freely from one place to another without experiencing network interruptions as Wi-Fi connected devices shift seamlessly from one access point to the next without losing connection.
Physical Details What is included? Parts included in the kit Wi-Fi access point Antenna adapter 2.4 GHz Magnetic mount antenna Connecting SMA cables Figure 1 Ethernet Connector The access Point device has a shielded 8P8C socket RJ45 for connection to local Ethernet network.
Factory Reset Button In order to reboot the device from network, hold the RESET button of the device when starting it until the LED light turns off, and Metal will start to look for Netinstall servers. Auxiliary equipment Antenna The MGRM style is a mag mount version. It utilises the powerful rare earth magnet for secure mobile applications.
Antenna Specification Table 1 Antenna Adapter The RX series Antenna Coupler permits the installation of non-Ex certified radio antenna in a hazardous area. It acts as a capacitive coupler between RF transmitter/receiver installed in a flameproof enclosure (or in the safe area) and a passive antenna installed in potentially explosive atmosphere.
Setting Up First Use Connect the antenna adapter to RP-SMA connectors. place the antenna on the machine and connect to the adapter Connect the Ethernet cable into the Ethernet switch The default IP address is 192.168.88.1 for configuration. User name is admin and there is no password ...
Overhaul, (or equivalent standards). Equipment should be maintained and inspected as per regulatory requirements or Mine Site statutory requirements whichever is less. ® Spare parts can be ordered from Nautitech through the following methods: Telephone +61 2 9899 6857...
The conductors that carry the power line signals between couplers or ® isolation barriers of Spitfire nodes RJ45 Common name for the 8P8C connector used for Ethernet cabling ® ® Spitfire The Nautitech underground communications range brand QA-PM-60-01 Page 21 of 22...