LG CBIS3618BE Owner's Manual page 22

22 OPERATION
3
Select ON, OFF, or RESET and press OK.
4
If ON is selected, the Wi-Fi icon
the bottom of the display.
5
If you select RESET, you will have to re-enter
the Wi-Fi password.
Brightness
Adjust the brightness of the LCD display from 20 %
to 100 % in increments of 20 %.
Setting Display Brightness
1
Press SETTINGS at the center bottom of the
main screen, and press Brightness.
2
Adjust the display brightness by pressing and
dragging the dot across the bar, by tapping
anywhere on the bar, or by pressing + or –.
3
Press OK.
Power Levels
1
Press SETTINGS at the center bottom of the
main screen, and press Power Levels.
2
Choose between 17 levels and 9 levels. (the
output of each maximum level is the same).
3
Press OK.
Language Selection
Set the display language to English, Spanish, or
French.
Selecting a Language
1
Press SETTINGS at the center bottom of the
main screen, and press Language Selection.
2
Select the desired language.
3
Volume
appears at
f
Adjust the volume of the cooktop controls.
Setting the Volume
1
2
3
Program Update
Once the appliance is connected to a home Wi-Fi
network, use this setting to check for available
programming updates and install them.
1
Factory Data Reset
This function returns all settings to the factory
defaults.
1
2
NOTE
• All stored data will be deleted.
Open Source License
This screen contains open source software
licensing information.
1
2
Press OK.
Press SETTINGS at the center bottom of the
main screen, swipe to the second settings
screen, and press Volume.
Select MUTE, LOW, or HIGH.
Press OK.
Press SETTINGS at the center bottom of the
main screen, swipe to the second settings
screen, and press Program Update.
Press SETTINGS at the center bottom of the
main screen, swipe to the second settings
screen,and press Factory Data Reset.
If you want to reset data to the factory
defaults, press RESET and then OK.
Press SETTINGS at the center bottom of the
main screen and swipe to the second settings
screen.
Press Open Source License.