Table of Contents
Advertisement
5.
Remove the protective film covering the screens
and the camera lens before using the phone.
Switch on the phone
To switch on the phone, press the
the PIN code if required (i.e. the 4 to 8-digit secret
code of your SIM card). It is preconfigured and
communicated to you by your operator or retailer. To
personalise the PIN code, see page 43.
If you enter a wrong PIN code 3 times, your SIM card
is blocked. To unblock it, you must request the PUK
code from your operator.
Set date and time
As prompted by the phone at first switch on, set the
date by pressing the appropriate numeric keys (press
c
to erase a number), then set the time.
For complete date and time options, see page 46.
Copy the SIM phonebook
If at first switch on, if you do not copy the SIM
phonebook , see "Contacts select" page 23.
2
)
key. Enter
The mobile phone detects a SIM card that already
contains names and a message asks you if you want to
copy your SIM phonebook onto the built-in
c
phonebook. Press
Calibration
This menu allows you to calibrate your screen, in
order to obtain a better accuracy when using it with
the stylus pen. Simply press
instructions. You must press all three signs one after
the other to complete the process.
Charge the battery
Your phone is powered by a rechargeable battery. A
new battery is partially charged and an alarm will warn
you when the battery reaches low. If the battery is
completely flat,it will take 2 or 3 minutes of charging
for its icon to reappear.
You may lose all your personal settings if you remove
the battery when the phone is switched on.
1.
Once the battery and battery cover are clipped
on the phone, plug the connector of the charger
(supplied with the phone, in the box) into the
LEFT hand socket at the base of the phone on
,
to cancel or
to accept.
,
and follow the
Getting started
Advertisement
Table of Contents
