Samsung AR24CSDADWKNCV Service Manual page 30

NO. Parts Procedure Remark
4 EVAPORATOR 20) The HOLDER PIPE is fixed
to body by 2 hooks as shown in the
figure.
21) To detach the HOLDER PIPE
from the main frame,loosen 2 hook
structhres.
When separate hooks: Use the (-)
Screw Driver. Insert the (-) Screw
Driver into the gap of the hook
and lean to the Moter side as
shown in figures. (Watch out for
the damate of hooks)
22)Remove the HOLDER PIPE.
23)Unfasten a screw of the Fan
Moter side.
(Use (+) Screw Driver.)
24)Unfasten 2 screws of the
opposite side of the Fan Moter.
(Use (+) Screw Driver.)
30