Page 4
Angled Post Leg Tables Overview Occasional Tables All parts listed are for a single table; additional parts will be needed for additional tables.
Page 5
Parts List Code Qty. Description GB#### Main Surface (Round or Square) APL or Angled Post Leg 3 or 4* APLSH (Sitting or Standing-Height) *Tables will have 3 or 4 legs depending on surface size.
Page 6
36” Round Sitting-Height Table Find center of surface by measuring 18” from edge. Once found, measure 2 ” from center of surface to the edge of leg plate. ” ANGLED POST LEGS 36” Round Standing-Height Table Find center of surface by measuring 18” from the edge. Once found, measure 5 ”...
Page 7
42” Round Sitting-Height Table Find center of surface by measuring 21” from edge. Once found, measure 5 ” from center of surface to edge of leg plate. ” ” ” 42” Round Standing-Height Table Find center of surface by measuring 21” from edge. Once found, measure 8 ”...
Page 8
48” Round Sitting-Height Table Find center of surface by measuring 24” from edge. Once found, measure 7 ” from center of surface to the edge of leg plate. ” ” ANGLED POST LEGS ” ” 48” Round Standing-Height Table Find center of surface by measuring 24” from the edge. Once found, measure 11”...
Page 9
36” x 36” Square Sitting-Height Table Find center of surface by measuring 18” from edge. Once found, measure 11 ” from center of surface to edge of leg plate. ” ” ” ” 36” x 36” Square Standing-Height Table Find center of surface by measuring 18” from edge. Once found, measure 7 ”...
Page 10
49” x 48” Square Sitting-Height Table Find center of surface by measuring 24” from edge. Once found, measure 19 ” from center of surface to the edge of leg plate. ” ” ANGLED POST LEGS ” ” 49” x 48” Square Standing-Height Table Find center of surface by measuring 24”...
Page 12
X-Base Tables Overview Occasional Tables All parts listed are for a single table; additional parts will be needed for additional tables.
Page 13
Parts List Code Qty. Description GB#### Main Surface (Round or Square) XT## or X-Base (Sitting or Standing-Height) XTBH## *Base will differ depending on surface size.
Page 14
Round Surface Align X-Base to center of surface and secure plate with wood screws. • 36” Surface Center: 18” • 42” Surface Center: 21” • 48” Surface Center: 24”...
Page 15
Square Surface Align X-Base to center of surface and secure plate with wood screws. • 36”x 36” Surface Center: 18” • 49”x48” Surface Center: 24”...