Removing The Oven Door - Zanussi MC 20 MB Instructions For The Use And Care

Removing the oven door
(Fig. 10 A, B, C,)
1. Open the oven door so that it is in the
horizontal position.
2. With the aid of a coin move the two
retaining discs a quarter turn clockwise,
so that the two raised bars are to the left
hand side of the hinges.
3. Raise the door halfway.
4. At this stage the two hinges on either
side of the door must be clasped together
simultaneously. The door can then be
removed by pulling out and downwards,
maintaining the angle.
To replace the door
1. Clasp the two hinges on either side of
the door together simultaneously.
2. Hook the top hinge into the top slot so
that the hook is engaged with the roller.
3. Drop the lower hinge into the lower
slot, so that the notch is engaged. Drop
the door down so it is in the horizontal
position.
Note. It is very important when carrying
out this operation that both hinges
should be located simultaneously.
4. Turn the retaining discs back a quarter
turn so that the two raised bars are
opposite the hinges.
The door can then be closed.
F^. lO/C
17