Samsung RT62 Series User Manual page 28

Installation
STEP 5 Unpack and put accessories in place (applicable models only)
The accessories that ship with this refrigerator are properly packed for transportation and
safety reasons. Unpack those accessories and put them in place.
Door guards
STEP 6 Initial settings
By completing the following steps, the refrigerator should be fully functioning.
1. Plug the power cord into the wall socket to turn the refrigerator on.
2. Open the door, and check if the interior light lights up.
3. Set the temperature to the coldest, and wait for about an hour. Then, the freezer will be
slightly chilled, and the motor will run smoothly.
4. Wait until the refrigerator reaches the set temperature. Now the refrigerator is ready
for use.
STEP 7 Final check
When installation is complete, confirm that:
• The refrigerator is plugged into an electrical outlet and grounded properly.
• The refrigerator is installed on a flat, level surface with a reasonable clearance from the
wall or the cabinet.
• The refrigerator is level and is sitting firmly on the floor.
• The door opens and closes freely, and the interior light turns on automatically when
you open the door.
28 English
Untitled-20 28
There are door guards provided with the
product. Insert door guards each to the
freezer and the fridge.
If you want to use the egg tray, make sure
it is put in the fridge or inserted in the
door guard.
2017-06-22 3:28:04