Related Manuals for Hyundai HCBEN40V-A
Summary of Contents for Hyundai HCBEN40V-A
- Page 1 CORDLESS LAWN TRIMMER HCBEN40V-A WARNING: Read thoroughly the instruction manual before use. English |...
- Page 2 IMPORTANT Safety READ CAREFULLY BEFORE USE KEEP FOR FUTURE REFERENCE Safe operating practices Training a) Read the instructions carefully. Be familiar with the controls and the correct use of the machine. b) Never allow children or people unfamiliar with these instructions to use the machine.
- Page 3 e) Switch on the motor only when the hands and feet are Safety away from the cutting means. f) Always disconnect the machine from the power supply (i.e. remove the plug from the mains, remove the disabling device or removable battery) 1) Whenever the machine is left unattended;...
- Page 4 - Never operate the machine while people, especially Safety children, or pets are nearby. Keep them at least 15 m away from the machine during its operation. - Stop using the tool when a risk might occur (people are nearby, dangerous material on the working area, problem with the tool, etc.).
- Page 5 while operating power tools may result in serious Safety personal injury. - Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
- Page 6 - Always inspect the tool before and after the operation Safety for signs of damage such as cracks in the cutting attachment or ageing. In case of damages or ageing, bring the tool to our agent service for inspection and reparation.
-
Page 7: Residual Risk
cause possible injury, poor performance and may void Safety your warranty. You may make adjustments and repairs described here. For other repairs, contact the authorized service agent. - Contact your dealer of manufacturer to know which parts/accessories can be used with this tool. - Before any maintenance or adjustment, stop the tool and remove the battery. -
Page 8: Risk Reduction
handles. Read and follow the directions elsewhere in Safety this manual to help reduce the risk of kickback. - Injuries may be caused, or aggravated, by prolonged use of a tool. When using any tool for prolonged periods, ensure you take regular breaks. RISK REDUCTION It has been reported that vibrations from hand-held tools may contribute to a condition called Raynaud’s Syndrome... -
Page 9: Intended Use
INTENDED USE Safety The product is only intended for use outdoors. For safety reasons the product must be adequately controlled by using two handed operation. The product is intended for cutting long grass, pulpy weed, or brush and similar vegetation at or about ground level. -
Page 10: Transportation And Storage
After extending new cutter line or cleaning, Safety checking the blade, always return the product to its normal operating position before starting. After each use, clean the product with a soft dry cloth. Check all nuts, bolts and screws at frequent intervals for proper tightness to ensure the product is in safe working condition. - Page 11 SYMBOLS ON THE PRODUCT Safety Safety alert Read and understand all instructions before operating the product, follow all warnings and safety instructions. Wear eye, ear and head protection. Wear non-slip safety footwear when using the product. Wear non-slip, heavy duty gloves. Wear ocular protection Wear hearing protection Do not expose to rain or damp condition.
- Page 12 Safety This unit is not intended for use with a toothed saw type blade. Beware of thrown or flying object. Keep all bystanders a safe distance away from the product. Beware of thrown or flying object. Keep all bystanders, especially children and pets, at least 15m away from the operating area Beware of blade thrust Guarantee sound power level...
- Page 13 DELIVERY Note: The battery and charger were not included in pack...
- Page 14 DESCRIPTION...
- Page 15 ASSEMBLY See the following drawings for assembly. Do not install the battery during the assembly. Wear protective equipment as described in Fig 1. Fig 1: protective equipment Fig 2: assembly of the carter of protection Fig 3: Assembly of the handle...
- Page 16 Fig 4: assembly of cutting bar in the tool Fig 5: removing the adhesive from the cutting blade Fig 6: Installing the battery...
- Page 17 Fig 7: Switch on the tool...
- Page 21 Changing the cutting mean Maintenance Always switch off the tool and remove the battery before changing the cutting mean.
- Page 22 Cleaning Maintenance WARNING – there is danger of moving hazardous parts. Always switch off the tool and remove the battery before cleaning. Clean the tool after each use. Follow the below figures. Check each time if there is any damage on the tool. In case of damage, do not use the tool and bring it to a service agent for inspection and repairs.
- Page 23 Maintenance Maintenance No specific maintenance must be provided by the user. Each season; bring the tool to a service agent for inspection. Storage Always clean the tool before storage. Switch off the tool and remove the battery and dissemble the tool. Store the tool out of reach of children.
- Page 24 Charging the battery...
- Page 25 PRODUCT SPECIFICATIONS Voltage: 36V d.c.(Max. 40V) No-load speed: 9000 min-¹ Lawn trimmer Cutting capacity : 254/305 mm Vibration level Lawn trimmer 3.5m/s Uncertainty 1.5m/s Noise emission level A-weighted sound pressure 82 dB(A) K= 2,5dB level(Lawn trimmer) A-weighted sound power 96 dB(A) level (Lawn trimmer) Weight without battery pack: 2.8kg...
- Page 26 ZI, 32, rue Aristide Bergès – 31270 Cugnaux - France Tel: +33 (0)5.34.502.502 Fax: +33 (0)5.34.502.503 Here with we declare that the product Cordless Lawn Trimmer HCBEN40V-A Serial number: 20201134238-20201134587 Year of Construction: 2020 Is in conformity with the following European Directives and harmonized standards...
-
Page 27: Warranty
WARRANTY WARRANTY The manufacturer guarantees the product against defects in material and workmanship for a period of 2 years from the date of the original purchase. The warranty only applies if the product is for household use. The warranty does not cover breakdowns due to normal wear and tear. The manufacturer agrees to replace parts identified as defective by the designated distributor. -
Page 28: Product Failure
PRODUCT FAILURE WHAT TO DO IF MY MACHINE BREAKS DOWN? If you bought your product in a store: a) Empty the fuel tank. b) Make sure that your machine is complete with all accessories supplied, and clean! If this is not the case, the repairer will refuse the machine. -
Page 29: Warranty Exclusions
WARRANTY EXCLUSIONS THE WARRANTY DOES NOT COVER: • Start-up and setting up of the product. • Damage resulting from normal wear and tear of the product. • Damage resulting from improper use of the product. • Damage resulting from assembly or start-up not in accordance with the user manual. •...