Humidity Control Of "Fresh Case" Crisper; Making Ice Cubes; Removing And Attaching Shelves - Panasonic NR-BN31AS1 Operating Instructions Manual

Humidity control of "Fresh Case" Crisper

Making ice cubes

Water
"Multibox" storage box can make ice cubes and store them.
To make ice cubes, fill the lid of the "Multibox" storage box with water and place it in the freeze drawer of the freezer.
When ice cubes are ready, take out the box from the freezer drawer. Remove the lid from the box, and push each cavity of
the lid from the back side. The ice cubes will pop out from the lid. Then, put the box back into its place.

Removing and attaching shelves

Fridge
Freezer
12 12 12
• The bin at the bottom of the refrigerator is intended for storing fruit
and vegetables. It keeps humidity and prevents the food from drying
out.
• Store the food in suitable packaging to prevent them from emitting or
taking on odors.
The bin has integrated humidity regulator which allows setting the
humidity according to the amount of food stored.
Smaller amounts of food - push the control slider to the right.
Larger amounts of food - push the control slider to the left.
1 1
2 2
Glass shelves
To remove a shelf from the
refrigerator, pull it out to the
point when it is stopped by
the guide. Then, lift it slightly
at the front part and pull it all
the way out.
The drawers are protected against pulling out. To remove a drawer from the appliance,
open it, then lift the front part and pull it out.
Having removed the drawer, you can store food in the empty compartment.
2 2
1 1
Chiller Case and "Fresh
Case" Crisper
Pull out the case as far as it will
go. Then, lift the front part and
pull it out completely.
Door shelves and bottle
shelf
To remove a shelf from the
appliance, lift it as far as it
will go and pull it out.