Advertisement
Quick Links
Advertisement
Related Manuals for Hyundai HTH20V
Summary of Contents for Hyundai HTH20V
-
Page 2: Safety Warnings
1. SAFETY WARNINGS WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. - Page 3 moving parts. g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards. 4) Power tool use and care a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
- Page 4 Keep cable away from cutting area. During operation the cable may be hidden in shrubs and can be accidentally cut by the blade. Check for any foreign objects in the hedge, such as wire fences. Hold the hedge trimmer correctly, for example with both hands if it is equipped with two handles.
- Page 5 Only the use of spare parts and accessories approved by the manufacturer is permitted. Specially design to work with Hyundai range of battery and charger. Any other use may be dangerous and severely damage the trimmer. Examples of improper use may include, but not limited to: o General grass cutting and in particular near kerbs;...
- Page 6 Symbols Warning symbol Wear a hearing protection Read the instructions manual Do not expose to rain or humidity Wear an ocular protection 2. YOUR TOOL a. Description 1. Cutting blade 5. Rear handle 2. Hand guard 6. Battery port 3. Front handle 7.
- Page 7 b. Technical data Voltage 20 V d.c. Cutting length 560 mm Cutting capacity 19 mm Sound pressure level LpA: 80dB(A) K= 3dB(A) Sound power level LwA: 90dB(A) Vibration 3,5m/s² K=1,5 m/s² Information The declared vibration total value has been measured in accordance with a standard test method and may be used for comparing one tool with another;...
- Page 8 Charging HYUNDAI range battery and charger not sold together with the tool, Battery has not been fully charged at the factory. 1) Take the battery pack out of the equipment. Do this by pressing the push lock button. 2) Check that your mains voltage is the same as that marked on the rating plate of the battery charger.
- Page 9 3) Insert the battery pack into the battery charger .then the red LED on charger will begin to Green flash light. 4) You will find a label with “Charger indicator” of the LED indicator on the charger. The battery pack can become a little warm during the charging. This is normal. If the battery pack fails to charge, check: ...
- Page 10 Charger indicator Indicator status Explanations and actions Ready for use The charger is connected to the mains and is ready for use; there is no battery pack in the charger. Charging The charger is charging the battery pack in charge mode. Battery pack is full of charge.
- Page 11 d. Starting the hedge trimmer Hold the firmly the machine with both hands. Press the safety switch, Fig 5 and then the trigger switch, Fig 6. NOTE: both switches must be enabled in order to switch the motor on and keep it running.
-
Page 12: Maintenance
To reduce fire hazards, clean the machine thoroughly to get rid of any remains of grass, leaves or excess grease, never leave containers with the cut debris inside the storage area. To increase the efficiency and working life of the blades, clean and lubricate them carefully after each work session Use a soft cloth to clean the blades, along with a brush to remove more difficult dirt and debris. - Page 13 6. Warranty We guarantee this product for 2 full years. The warranty period for this item starts on the day of purchase. You can prove the date of purchase by sending us the original receipt. We insure over the entire warranty period: •...
-
Page 14: Declaration Of Conformity
EC Declaration of conformity BUILDER SAS 32, rue Aristide Bergès - ZI 31270 Cugnaux – France Declares that the machine Designation: CORDLESS HEDGE TRIMMER Model: HTH20V Serial number: 20200720715-20200721014 Is in conformity with the European Directives: Machine Directive 2006/42/EC EMC Directive 2014/30/EU...