Table of Contents
Advertisement
2-2-10 Network Stack Configuration
Parameter
Network Stack
Ipv4 PXE Support
(Note)
Ipv4 HTTP Support
(Note)
Ipv6 PXE Support
(Note)
Ipv6 HTTP Support
(Note)
PXE boot wait time
(Note)
Media detect count
(Note)
(Note)
This item appears when Network Stack is set to Enabled.
Description
Enable/Disable the UEFI network stack.
Options available: Enabled, Disabled. Default setting is Enabled.
Enable/Disable the Ipv4 PXE feature.
Options available: Enabled, Disabled. Default setting is Enabled.
Enable/Disable the Ipv4 HTTP feature.
Options available: Enabled, Disabled. Default setting is Disabled.
Enable/Disable the Ipv6 PXE feature.
Options available: Enabled, Disabled. Default setting is Enabled.
Enable/Disable the Ipv6 HTTP feature.
Options available: Enabled, Disabled. Default setting is Disabled.
Wait time in seconds to press ESC key to abort the PXE boot.
Press the <+> / <-> keys to increase or decrease the desired values.
Number of times the presence of media will be checked.
Press the <+> / <-> keys to increase or decrease the desired values.
BIOS Setup
- 51 -
Advertisement
Table of Contents
