Table of Contents
Advertisement
Bottom view
Keyboard drainage hole
Emergency-reset hole
If the computer stops responding and you cannot turn it off by pressing the power button, reset your
computer:
1. Disconnect your computer from ac power.
2. Insert a straightened paper clip into the hole to cut off power supply temporarily.
3. Connect your computer to ac power and then turn on your computer.
CAUTION:
When the computer is operating, it should be placed on a hard and flat surface with its bottom area
not in contact with user's bare skin. Under normal operating conditions, the temperature of the
bottom surface will remain within an acceptable range as defined in IEC 62368-1, but such
temperatures can still be high enough to cause discomfort or harm to the user if directly touched for
over one minute at a time. As such, it is recommended that users avoid prolonged direct contact with
the bottom of the computer.
Rear view
Emergency-reset hole
.
Chapter 1
Meet your computer
5
Advertisement
Table of Contents
