Memory; Removing The Memory Module; Installing The Memory Module - Dell NOT22106 Owner's Manual

Next steps
1. Install the base cover.
2. Follow the procedure in

Memory

Removing the memory module

Prerequisites
1. Follow the procedure in
2. Remove the base cover.
About this task
The following image indicates the location of the memory modules and provides a visual representation of the removal
procedure.
Steps
1. Use your fingertips to carefully spread apart the securing-clips on each end of the memory-module slot until the memory
module pops up.
2. Remove the memory module from the memory-module slot.
NOTE: Repeat step 1 and step 2 if there is a second memory module installed on your computer.

Installing the memory module

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
44 Removing and installing Customer Replaceable Units (CRUs)
After working inside your
Before working inside your
computer.
computer.