Table of Contents
Advertisement
2-18: SUB SHARPNESS
1.
Activate the adjustment mode display of Fig. 1-1 and
press the channel button (17) on the remote control to
select "SHARPNESS".
2.
Check if the step No. of SHARPNESS is "38".
3.
Press the INPUT SELECT button on the remote control
to set to the AV mode. Then perform the above
adjustment 1~2.
2-19: H. VCO
1.
Activate the adjustment mode display of Fig. 1-1 and
press the channel button (04) on the remote control to
select "H VCO".
2.
Check if the step No. of H VCO is "3".
ELECTRICAL ADJUSTMENTS
D3-4
Advertisement
Table of Contents
