Removal Of Mechanical Parts And P.c. Boards - Toshiba MV19L2W Service Manual

1. REMOVAL OF MECHANICAL PARTS
AND P.C. BOARDS
1-1: BACK CABINET (Refer to Fig. 1-1)
Remove the 6 screws 1.
1.
Remove the screw 2.
2.
Remove the AC cord from the AC cord hook 3.
3.
4. Remove the Back Cabinet in the direction of arrow.
1
1
1
2
Back Cabinet
1-2: CRT PCB (Refer to Fig. 1-2)
CAUTION: BEFORE REMOVING THE ANODE CAP,
DISCHARGE ELECTRICITY BECAUSE IT
CONTAINS HIGH VOLTAGE.
BEFORE ATTEMPTING TO REMOVE OR
REPAIR ANY PCB, UNPLUG THE POWER
CORD FROM THE AC SOURCE.
Remove the Anode Cap.
1.
(Refer to REMOVAL OF ANODE CAP)
2. Disconnect the following connectors:
(CP801 and CP851B).
3. Remove the CRT PCB in the direction of arrow.
Front Cabinet
1-3: TV/VCR BLOCK (Refer to Fig. 1-3)
Remove the 2 screws 1.
1.
2. Disconnect the following connectors:
(CP352, CP353, CP354, CP401, CP502 and CP503).
Unlock the support 2.
3.
4. Remove the TV/VCR Block in the direction of arrow.
DISASSEMBLY INSTRUCTIONS
Front Cabinet
1
1
3
1
Fig. 1-1
CRT PCB
Fig. 1-2
Front Cabinet
1-4: DECK CHASSIS AND SYSCON PCB
(Refer to Fig. 1-4)
Remove the 3 screws 1.
1.
Remove the 2 screws 2.
2.
Remove the screw 3.
3.
Remove the screw 4.
4.
5. Disconnect the following connectors:
(CP1004, CP1005, CP1006, CP4001, CP4002 and
CP4003).
6. Remove the Deck Chassis and Deck Shield Plate in
the direction of arrow (A).
Remove the screw 5.
7.
8.
Remove the Syscon PCB in the direction of arrow (B).
Remove the screw 6.
9.
10. Remove the Bottom Shield.
1
2
(A)
5
Bottom Shield
1
1
2
UP TO
RELEASE
TV/VCR Block
1
3
1
4
Deck Shield Plate
2
Deck Chassis
Syscon PCB
(B)
Deck Holder
6
Fig. 1-3
Fig. 1-4