Philips 639 User Manual page 55

disconnection: allows you to select an inactivity
Auto
time period after which the phone automatically
disconnects (if a connection was is progress) from the
+
network. Press or
,
to 10min. and press
The lack of exchanges with the network (connecting,
sending an e-mail, disconnecting) defines the
inactivity time period leading to auto disconnection.
Login and Password were up to you when you
subscribed to your account. Enter them also as
defined.
E-mail server access
The menus described in this section feature settings
needed to connect to the e-mail server of your Internet
Service Provider (ISP) via your mobile phone. Most
parameters are communicated to you by your service
provider and must be entered as given.
,
1. Press , select
Messages
,
and press
Settings
2. Select
E-Mail server
be completed are the following:
SMTP address, Login,
address.
Messages
-
to select a value from 3
to validate.
> >
E-mail E-mail 1
.
,
and press . The fields to
POP3 address,
Password and E-Mail
• address: allows you to enter the IP or DNS
POP3
address of the POP3 server, which is used to
receive e-mails.
• address: allows you to enter the IP or DNS
SMTP
address of the SMTP server, which is used to
send e-mails.
WARNING ! Network-dependent! For an e-mail connection
via GPRS, if your phone operator is not your e-mail
provider, contact your operator to get the correct address of
the SMTP server and enter it in this field.
In some cases, Login,
up to you when you subscribe to your account. Enter
them as defined.
Account name
This menu allows you to rename the available e-mail
accounts.
An e-mail account might be preconfigured with the
>
name of your operator. In this case, its name cannot be
changed.
,
1. Press , select
>
Settings Account name
2. Enter the new name in the edition window that
appears and press
Password and E-mail address
Messages > E-mail > E-mail 1
,
and press .
,
.
are
>
47