Setup Instructions; Product Specifications - Intex 128646GS Owner's Manual

Krystal clear sand filter unit
Table of Contents

Advertisement

PRODUCT SPECIFICATIONS

The sand filter removes suspended particles but does not sanitize your pool. Pool chemistry
is a specialized area and you should consult your local pool service specialist for details.
Model:
Power:
Wattage:
Maximum working pressure: 2 bar (30 psi)
Effective filtering area:
Pump flow rate (at pump outlet): 7.9 m
Recommended filtering
media quantity:
Recommended filtering
media (Not included):
Limited Warranty:
NOTE: NOT SUITABLE FOR USE WITH KCP-LOW -SALT AUTOMATIC SALTWATER SYSTEM
(MODEL 6110/6220).
TOOLS REQUIRED:
One (1) Phillips screwdriver
Pump location and mounting:
The system must be installed on a solid level and vibration-free base.
Provide a location protected from the weather, moisture, flooding and freezing
temperature.
Provide adequate access, space and lighting for routine maintenance.
Pump motor requires free circulation of air for cooling. Do not install the pump in a
damp or non-ventilated location.
A team of 2 or more people is recommended for setting up this product.
The appliance is intended only for household use.
Motor pre-filtering assembly setup:
1.
Remove the sand filter and its accessories from the packaging carefully and inspect for any
visible damage.
2.
In a counter-clockwise motion unscrew the leaf trap cover (14) from the pre-filter housing.
Take out the basket (16) and filter housing nut (17) (see drawing 10).
3.
Connect the pre-filter housing to the motor water inlet. Note: Align the connector in the
pre-filter housing with the water inlet on the motor (see drawing 11).
14
35
16
17
SAVE THESE INSTRUCTIONS
(195GS) SAND FILTER PUMP ENGLISH 7.5" X 10.3" PANTONE 295U 09/18/2017
SF80220RC-1
220-240 Volt AC
250 W
2
2
0.07 m
(0.79 ft
)
3
/h (2100 GPH) 10.5 m
No. 20 silica sand
23 Kg (50 Lbs) or
glass sand 16 Kg
(35 Lbs).
No. 20 silica sand or glass sand. Particle size range 0.45 to 0.85
mm (0.018 to 0.033 inches). Uniformity Coefficient less than 1.75.
see "Limited Warranty"

SETUP INSTRUCTIONS

10
SF70220RC-1
SF60220RC-1
220-240 Volt AC
220-240 Volt AC
450 W
550 W
2 bar (30 psi)
2 bar (30 psi)
2
2
0.1 m
(1.07 ft
)
0.13 m
3
/h (2800 GPH) 12 m
No. 20 silica sand
No. 20 silica sand
35 Kg (77 Lbs) or
55 Kg (120 Lbs) or
glass sand 25 Kg
glass sand 38 Kg
(55 Lbs).
(85 Lbs).
195
English
GS
2
2
(1.44 ft
)
3
/h (3200 GPH)
11
Page 8

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sf70220rc-1Sf60220rc-1Sf80220rc-1

Table of Contents