Table of Contents
Advertisement
DSUB9 Download <.......>
16.9. Diagnostic
Eeprom I2C
Tuner I2C
IF I2C
HDMI I2C
DTV RS232
16.10.
Product Info
17. SOFTWARE UPDATE DESCRIPTION
16.1 17MB35 Analog Part Software Update With Bootloader Procedure
1.1 The File Types Used By The Bootloader
All file types that used by the bootloader software are listed below:
1. The Binary File : It has ".bin" extension and it is the tv application. Its size is 1920
Kb.
2. The Config Binary File :
application. Its size may be 64 Kb or a few times 64 Kb.
3. The Test Script File : It has ".txt" extension and it is the test script that is parsed
and executed by the bootloader. It don't have to be any times of 64 Kb.
4. The Test Binary File : It has ".tin" extension and it is used and written by the test
groups. It is run to understand the problem part of the hardware.
Alltough a file that is used by the bootloader can be had any one of these extensions, its
name has to be "VESTEL_S" and it has to be located in the root directory of the usb
device.
1.2 Usage of The Bootloader
1. The starting to pass through : The chassis is only powered up.
2. The starting to download something : When chassis is powered up the menu key has
to be pushed.Before the chassis is powered up and if any usb device is plugged to the
usb port, the programme is downloaded from usb firstly.
Any usb device is plugged to usb port , user must open hyperterminal in the pc and
connect pc to chassis via Mstar debug tool and any one of scart,dsub9 or I2c
connectors. Serial connection settings are listed below:
-
Bit per second: 115200
-
Data bits: 8
If "On" selected, DTV software can be updated from DSUB9.
It has ".cin extension and it is the config of the tv
Advertisement
Table of Contents
