Table of Contents
Advertisement
8. SELF DIAGNOSTIC FUNCTION
1) Press "9" button on Remote Control during display of adjustment menu in the service mode.
The diagnosis will begin to check if interface among IC's are executed properly.
2) During diagnosis, the following displays are shown.
<SELF CHECK>
23******
POWER
: 00
BUS LINE : OK
BUS CONT : OK
BLOCK
: UV V
Part number of microcomputer (QA01)
Operation number of protecting circuit ----"00" is nor-
mal.
When indication is other than "00", overcurrent apts to
flow, and circuit parts may possibly be damaged.
BUS LINE CHECK ----"OK" is normal.
"SDA1-GND" ------------- SDA-GND short circuit.
"SCL1-GND" -------------- SCL-GND short circuit.
"SCL1-SDA1" ------------- SCL-SDA short circuit.
BUS CONT ----"OK" is normal.
When indication shows "Q uuu NG", the device with
the number may possibly be damaged.
BLOCK
UV : TV reception mode
V
: VIDEO input mode (a1)
The items marked with
*
are not usable to display in the SELF DIAGNOSTIC FUNCTION for some model.
Indicated color of mode now selected : Green and Red
Indicated color of other modes
Green : Normal
Red :
The microprocessor operates to provide judgement
of no video signal. The red color is still indicated
though the signal is input, failure may exist in input
signal line including QV01.
– 8 –
: White
Advertisement
Table of Contents
